86-755-26998910
Floor 3, Bldg. A, Shenzhen Yingbo Printing Ink Industry Co., Ltd., Donghuan 2nd Road, Longhua Street, Longhua New Dist., Shenzhen, Guangdong, China (Mainland)
 |
DV860 Brand: DVS Original: China The DVS860 is full digital 2-phase stepper drive based on DSP control and It is designed by DVS company for use with the 2-phase hybrid stepper motor of all kinds with nema 23 to nema34. It is widely used in engraving machines,milling machines, packing machines, labeling machines and medical machines. |
Main Features:
l 16 channels constant angle, constant torque micro steps, highest micro step: 51200ppr
l Highest response frequency: 200Kpps
l Current of winding will be reduced by approximately 50% when no step pulse command is received for
1.5 seconds
l Opto-isolated signal I/O
l Drive current is adjustable in 8 channels from 2.0A/phase to 6.0A/phase
l Single power supply from Single power supply from 18V-80VAC / 24V-110VDC
l Better to overcome the problem of low frequency vibration
l Dimension : 150×53×97.5mm3; Net Weight : 0.6Kg
Port | Number | Symbol | Functions / Applications | Definition |
Signal Port | 1 | PU+ | Positive of opto-isolated input signal | Connect to positive supply, drive voltage ranges from 5V to +28V. Current-limiting resistance is not needed when it is over 5V. |
2 | PU- | DP9=OFF, PU is step pulse signal | With the falling edge of the signal PU, the motor executes an angular step. The input resistance is 220Ω. Low voltage 0-0.5V, high voltage more than 4V, pulse width>2.5μS. | |
DP9=ON, PU is positive step pulse signal | ||||
3 | DR+ | Positive of opto-isolated input signal | Connect to the end of the power supply, drive voltage ranges from 5V to +28V. Current-limiting resistance is not needed when it is over 5V. | |
4 | DR- | DP9=OFF, DR is direction signal | Change the motor’s direction of rotation. Input resistance is 220Ω. Low voltage 0-0.5V, high voltage more than 4V, pulse width>2.5μS | |
DP9=ON, DR is negative step pulse signal | ||||
5 | MF+ | Positive of opto-isolated input signal | Connect to the end of the power supply, drive voltage ranges from 5V to +28V. Current-limiting resistance is not needed when it is over 5V. | |
6 | MF- | Motor free signal | The motor is in the free state and the driver stops working when it is effective. | |
Motor And Power Supply | 7 | V- | Power supply | AC18-80V/ DC24-110V |
8 | V+ | |||
9 | A+ | Connection |
| |
10 | A- | |||
11 | B+ | |||
12 | B- |
Current Setting:
The stepper drive working current is set by DIP switches SW1 to SW3.
Current(A) | 2.0 | 2.5 | 3.2 | 3.8 | 4.2 | 4.8 | 5.3 | 6.0 |
SW1 | ON | OFF | ON | OFF | ON | OFF | ON | OFF |
SW2 | ON | ON | OFF | OFF | ON | ON | OFF | OFF |
SW3 | ON | ON | ON | ON | OFF | OFF | OFF | OFF |
SW4: OFF=Half Current; ON=Full Current.
Subdivision Setting:
The subdivision(micro step) is set by DIP switches SW5 to SW8, SW9 and SW10 are function settings,
16 channels in total.
Subdivision (ppr) | 400 | 800 | 1600 | 3200 | 6400 | 12800 | 25600 | 51200 |
SW5 | ON | OFF | ON | OFF | ON | OFF | ON | OFF |
SW6 | ON | ON | OFF | OFF | ON | ON | OFF | OFF |
SW7 | ON | ON | ON | ON | OFF | OFF | OFF | OFF |
SW8 | ON | ON | ON | ON | ON | ON | ON | ON |
Subdivision (ppr) | 1000 | 2000 | 4000 | 5000 | 8000 | 10000 | 20000 | 40000 |
| SW5 | ON | OFF | ON | OFF | ON | OFF | ON | OFF |
| SW6 | ON | ON | OFF | OFF | ON | ON | OFF | OFF |
| SW7 | ON | ON | ON | ON | OFF | OFF | OFF | OFF |
| SW8 | OFF | OFF | OFF | OFF | OFF | OFF | OFF | OFF |
SW9 | ON, double pulse: PU is positive pulse signal, DR is negative pulse signal | |||||||
| OFF, single pulse: PU is pulse signal, DR is direction signal. | ||||||||
| SW10 | Self detect switch(OFF:accept external pulse, ON:the drive send pulse to make the motor work at the speed of 30r/min. | |||||||
Note: The subdivisions can be customized by your requirement.
Note: The carton box is designed by DVS company, the same as the outlook of the drive.
Shenzhen DVS Mechatronics Co.,Ltd
Tel: +86(075)26998910
Fax: +86(075)26998920
Mob: +86 13612901214
Home Page: http:https://dvs.waimaotong.com
add: Floor 3, Building 1, Yingbo Industrial Zone, Donghuan 2 road, Longhua district, Shenzhen, China.
Main Products:
1.Hybrid stepper drives including 2 phases and 3 phases.
2.Hybrid stepper motors from nema 17 to nema 51.
3.Full closed-loop step drives and motors with 1000-line encoder
4.High performance ac servos with 17-bit encoder or 2500-line encoder
Certificate:
Our Exhibition:
Q1: Are you factory? Can you OEM for me?
A: All the products sold in the store are designed by DVS company and we are factory without any middlemen. OEM&ODM accepted.
Q2: What is your terms of payment?
A: T/T 50% as deposit, and the balance before delivery. We will show you the photos of the products and packages before you pay the balance.
Q3: What are your terms of delivery?
A: EXW, FOB, FCA, CIF, CFR
Q4: How about your delivery time?
A: Generally, it only take 1-3 days to delivery if samples are in stock.And customized products needs 15 days.
Q5: Do you test all your goods before delivery?
A: To ensure 100% good product quality, all products not only need regular testing processes, also needs a strict system of high temperature aging for a long time.
Q6: How do you make our business long-term and good relationship?
A: 1. We keep good quality and competitive price to help our customers get the largest benefit.
2. We provide good after-sale service to our every customer.
Matched Motors:
NEMA 23 Stepper Motor NEMA 34 Stepper Motor
